Starting from
08cffe66 ("xsm: add a default policy to .init.data") we
can attach a xsm policy blob to hypervisor. To build that policy blob
now hypervisor build system needs to enter tools directory.
The expectation for hypervisor and tools build systems is different. We
don't want xen build system to depend on configure but we want tools
build system to. That commit broke this expectation because it required
users to run configure before building hypervisor. This broke ARM build
because ARM developers normally build hypervisor and tools separately
(and possibly on different platforms). It can also break x86 if
developers don't run configure before building hypervisor with XSM on.
To fix it, move major part of tools/flask/policy/Makefile into
Makefile.common and create tools only Makefile to include that common
Makefile. Hypervisor Makefile will use Makefile.common to build xsm
policy.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Julien Grall <julien.grall@arm.com>
XEN_ROOT=$(CURDIR)/../../..
include $(XEN_ROOT)/tools/Rules.mk
-########################################
-#
-# Configurable portions of the Makefile
-#
-########################################
-
-CONFIG_MLS ?= n
-
-# Number of available MLS sensitivities and categories.
-# The sensitivities will be s0 to s(MLS_SENS-1). Dominance will be in
-# increasing numerical order with s0 being lowest.
-MLS_SENS ?= 16
-# The categories will be c0 to c(MLS_CATS-1).
-MLS_CATS ?= 256
-
-# executable paths
-CHECKPOLICY ?= checkpolicy
-M4 ?= m4
-
-# Output security policy version. Leave unset to autodetect.
-OUTPUT_POLICY ?= $(BEST_POLICY_VER)
-
-########################################
-#
-# End of configuration options
-#
-########################################
-
-POLICY_FILENAME = xenpolicy-$(shell $(MAKE) -C $(XEN_ROOT)/xen xenversion --no-print-directory)
-POLICY_LOADPATH = /boot
-
-# List of policy versions supported by the hypervisor
-POLICY_VER_LIST_HV = 24 30
-
-# policy source layout
-POLDIR := policy
-MODDIR := modules
-
-# Classes and access vectors defined in the hypervisor. Changes to these require
-# a recompile of both the hypervisor and security policy.
-FLASKDIR := ../../../xen/xsm/flask/policy
-SECCLASS := $(FLASKDIR)/security_classes
-ISID_DECLS := $(FLASKDIR)/initial_sids
-AVS := $(FLASKDIR)/access_vectors
-
-# Additional classes and access vectors defined by local policy
-SECCLASS += $(POLDIR)/security_classes
-AVS += $(POLDIR)/access_vectors
-
-# Other policy components
-M4SUPPORT := $(wildcard $(POLDIR)/support/*.spt)
-MLSSUPPORT := $(POLDIR)/mls
-USERS := $(POLDIR)/users
-ISID_DEFS := $(POLDIR)/initial_sids
-DEV_OCONS := $(POLDIR)/device_contexts
-
-# config file paths
-GLOBALTUN := $(POLDIR)/global_tunables
-MOD_CONF := $(MODDIR)/modules.conf
-
-# checkpolicy can use the #line directives provided by -s for error reporting:
-M4PARAM := -D self_contained_policy -s
-
-# The output of checkpolicy -V is "30 (compatibility range 30-15)", and the
-# first word of the output is the maximum policy version supported.
-CHECKPOLICY_VER_MAX := $(firstword $(shell $(CHECKPOLICY) -V))
-
-# Find the highest version supported by both the hypervisor and checkpolicy
-BEST_POLICY_VER := $(shell best=24; for ver in $(POLICY_VER_LIST_HV); do if test $$ver -le $(CHECKPOLICY_VER_MAX); then best=$$ver; fi; done; echo $$best)
-
-CHECKPOLICY_PARAM := -t Xen -c $(OUTPUT_POLICY)
-
-# enable MLS if requested.
-ifneq ($(CONFIG_MLS),n)
- M4PARAM += -D enable_mls
- CHECKPOLICY_PARAM += -M
-endif
-
-# Always define these because they are referenced even in non-MLS policy
-M4PARAM += -D mls_num_sens=$(MLS_SENS) -D mls_num_cats=$(MLS_CATS)
-
-
-# modules.conf setting for policy configuration
-MODENABLED := on
-
-# extract settings from modules.conf
-ENABLED_LIST := $(shell awk '/^[ \t]*[a-z]/{ if ($$3 == "$(MODENABLED)") print $$1 }' $(MOD_CONF) 2> /dev/null)
-
-# Modules must provide a .te file, although it could be empty
-ALL_MODULES := $(foreach mod,$(ENABLED_LIST),$(MODDIR)/$(mod).te)
-
-# Modules may also provide interfaces and constraint definitions
-ALL_INTERFACES := $(wildcard $(ALL_MODULES:.te=.if))
-ALL_CONSTRAINTS := $(wildcard $(ALL_MODULES:.te=.cons))
-
-# The order of these files is important
-POLICY_SECTIONS := $(SECCLASS) $(ISID_DECLS) $(AVS)
-POLICY_SECTIONS += $(M4SUPPORT) $(MLSSUPPORT)
-POLICY_SECTIONS += $(ALL_INTERFACES)
-POLICY_SECTIONS += $(GLOBALTUN)
-POLICY_SECTIONS += $(ALL_MODULES)
-POLICY_SECTIONS += $(USERS)
-POLICY_SECTIONS += $(ALL_CONSTRAINTS)
-POLICY_SECTIONS += $(ISID_DEFS) $(DEV_OCONS)
-
-all: $(POLICY_FILENAME)
-
-install: $(POLICY_FILENAME)
- $(INSTALL_DIR) $(DESTDIR)/$(POLICY_LOADPATH)
- $(INSTALL_DATA) $^ $(DESTDIR)/$(POLICY_LOADPATH)
-
-$(POLICY_FILENAME): policy.conf
- $(CHECKPOLICY) $(CHECKPOLICY_PARAM) $^ -o $@
-
-policy.conf: $(POLICY_SECTIONS) $(MOD_CONF)
- $(M4) $(M4PARAM) $(POLICY_SECTIONS) > $@
-
-clean:
- $(RM) tmp policy.conf $(POLICY_FILENAME)
-
-distclean: clean
-
-.PHONY: all install clean distclean
+include $(CURDIR)/Makefile.common
--- /dev/null
+# This file is referenced by both hypervisor build and tools build
+# so there shouldn't be any tools specific things here.
+
+XEN_ROOT=$(CURDIR)/../../..
+
+########################################
+#
+# Configurable portions of the Makefile
+#
+########################################
+
+CONFIG_MLS ?= n
+
+# Number of available MLS sensitivities and categories.
+# The sensitivities will be s0 to s(MLS_SENS-1). Dominance will be in
+# increasing numerical order with s0 being lowest.
+MLS_SENS ?= 16
+# The categories will be c0 to c(MLS_CATS-1).
+MLS_CATS ?= 256
+
+# executable paths
+CHECKPOLICY ?= checkpolicy
+M4 ?= m4
+
+# Output security policy version. Leave unset to autodetect.
+OUTPUT_POLICY ?= $(BEST_POLICY_VER)
+
+########################################
+#
+# End of configuration options
+#
+########################################
+
+POLICY_FILENAME = xenpolicy-$(shell $(MAKE) -C $(XEN_ROOT)/xen xenversion --no-print-directory)
+POLICY_LOADPATH = /boot
+
+# List of policy versions supported by the hypervisor
+POLICY_VER_LIST_HV = 24 30
+
+# policy source layout
+POLDIR := policy
+MODDIR := modules
+
+# Classes and access vectors defined in the hypervisor. Changes to these require
+# a recompile of both the hypervisor and security policy.
+FLASKDIR := ../../../xen/xsm/flask/policy
+SECCLASS := $(FLASKDIR)/security_classes
+ISID_DECLS := $(FLASKDIR)/initial_sids
+AVS := $(FLASKDIR)/access_vectors
+
+# Additional classes and access vectors defined by local policy
+SECCLASS += $(POLDIR)/security_classes
+AVS += $(POLDIR)/access_vectors
+
+# Other policy components
+M4SUPPORT := $(wildcard $(POLDIR)/support/*.spt)
+MLSSUPPORT := $(POLDIR)/mls
+USERS := $(POLDIR)/users
+ISID_DEFS := $(POLDIR)/initial_sids
+DEV_OCONS := $(POLDIR)/device_contexts
+
+# config file paths
+GLOBALTUN := $(POLDIR)/global_tunables
+MOD_CONF := $(MODDIR)/modules.conf
+
+# checkpolicy can use the #line directives provided by -s for error reporting:
+M4PARAM := -D self_contained_policy -s
+
+# The output of checkpolicy -V is "30 (compatibility range 30-15)", and the
+# first word of the output is the maximum policy version supported.
+CHECKPOLICY_VER_MAX := $(firstword $(shell $(CHECKPOLICY) -V))
+
+# Find the highest version supported by both the hypervisor and checkpolicy
+BEST_POLICY_VER := $(shell best=24; for ver in $(POLICY_VER_LIST_HV); do if test $$ver -le $(CHECKPOLICY_VER_MAX); then best=$$ver; fi; done; echo $$best)
+
+CHECKPOLICY_PARAM := -t Xen -c $(OUTPUT_POLICY)
+
+# enable MLS if requested.
+ifneq ($(CONFIG_MLS),n)
+ M4PARAM += -D enable_mls
+ CHECKPOLICY_PARAM += -M
+endif
+
+# Always define these because they are referenced even in non-MLS policy
+M4PARAM += -D mls_num_sens=$(MLS_SENS) -D mls_num_cats=$(MLS_CATS)
+
+
+# modules.conf setting for policy configuration
+MODENABLED := on
+
+# extract settings from modules.conf
+ENABLED_LIST := $(shell awk '/^[ \t]*[a-z]/{ if ($$3 == "$(MODENABLED)") print $$1 }' $(MOD_CONF) 2> /dev/null)
+
+# Modules must provide a .te file, although it could be empty
+ALL_MODULES := $(foreach mod,$(ENABLED_LIST),$(MODDIR)/$(mod).te)
+
+# Modules may also provide interfaces and constraint definitions
+ALL_INTERFACES := $(wildcard $(ALL_MODULES:.te=.if))
+ALL_CONSTRAINTS := $(wildcard $(ALL_MODULES:.te=.cons))
+
+# The order of these files is important
+POLICY_SECTIONS := $(SECCLASS) $(ISID_DECLS) $(AVS)
+POLICY_SECTIONS += $(M4SUPPORT) $(MLSSUPPORT)
+POLICY_SECTIONS += $(ALL_INTERFACES)
+POLICY_SECTIONS += $(GLOBALTUN)
+POLICY_SECTIONS += $(ALL_MODULES)
+POLICY_SECTIONS += $(USERS)
+POLICY_SECTIONS += $(ALL_CONSTRAINTS)
+POLICY_SECTIONS += $(ISID_DEFS) $(DEV_OCONS)
+
+all: $(POLICY_FILENAME)
+
+install: $(POLICY_FILENAME)
+ $(INSTALL_DIR) $(DESTDIR)/$(POLICY_LOADPATH)
+ $(INSTALL_DATA) $^ $(DESTDIR)/$(POLICY_LOADPATH)
+
+$(POLICY_FILENAME): policy.conf
+ $(CHECKPOLICY) $(CHECKPOLICY_PARAM) $^ -o $@
+
+policy.conf: $(POLICY_SECTIONS) $(MOD_CONF)
+ $(M4) $(M4PARAM) $(POLICY_SECTIONS) > $@
+
+clean:
+ $(RM) tmp policy.conf $(POLICY_FILENAME)
+
+distclean: clean
+
+.PHONY: all install clean distclean
POLICY_SRC := $(XEN_ROOT)/tools/flask/policy/xenpolicy-$(XEN_FULLVERSION)
policy.bin: FORCE
- $(MAKE) -C $(XEN_ROOT)/tools/flask/policy
+ $(MAKE) -f $(XEN_ROOT)/tools/flask/policy/Makefile.common -C $(XEN_ROOT)/tools/flask/policy
cmp -s $(POLICY_SRC) $@ || cp $(POLICY_SRC) $@
policy.c: policy.bin gen-policy.py
projects / xen.git / commitdiff